2) This isn't a particularly interesting model to sculpt. The parent model is a scan of a ceramic rabbit, and it doesn't have crisp details like really good marble sculptures do.
I have seen Venus Victrix[0] in person, and the detail in the mattress the figure is lying on is absolutely transfixing. You would swear the marble would softly yield if you put your finger on it. There's a detail rendered around the edge of the mattress that likely represents embroidery and it's unbelievably crisp, even as it follows the folds and creases in the mattress.
If we're going to have robots sculpt marble, that is the standard we should be reaching for. If we're reaching for that, I think we're going to find that modeling the finished product in 3d is going to be a significant fraction of the work of actually carving it in stone. I think we're also going to find that the mastery also lies in the tiny decisions the sculptor makes as they work, informed by how light plays off the material in different directions in real time throughout the day.
Can the process in the article achieve results suitable for mounting at the top of a building and viewed from ground level? Probably, and if not now, certainly with time. Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.
[0] https://en.wikipedia.org/wiki/Venus_Victrix_(Canova) Seriously, this and Bernini's David, also at the Galleria Borghese, are worth the trip to Rome to see. If there were nothing else in Rome worth seeing and the food was terrible, they would justify the pilgrimage on their own.
Huh, I remember discourse with the CEO (I think) of Monumental on twitter a while ago. There was a frenzy around anti-ai art at the time. If I remember right, he replied to many comments that very skilled human artisans still did the final touches on the sculptures that were cnc carved rough. It really seemed like he was taking that criticism seriously
But now, "... our system turns a 3D model and a block of marble into a finished sculpture, with no human in the loop."
I'm not judging one way or the other. I have 0 skin in this debate. I just find situations like that interesting; like trying to douse a publicity fire while secretly making wildfire
Same; it's a fascinating tech exploration, and I enjoyed reading about how it works.
But part of the reason I find carved statues to be impressive and monumental is the technical human feat and the craftsmanship. Looking at them, you can sort of feel the work they must have required.
Mass produced goods aren't inherently bad; but there is something lost in translation for pieces like this, IMO.
Yep, people think they have timeless taste, but mostly it's a reaction to their environment. If you grew up in a works surrounded by endless over the top ornamentation, clean simple lines look fresh, new and appealing. If you grew up in a world of glass boxes, you're desperate for ornamentation.
I recommended seeking the first clip to 00:30 and play it from there. The perspective is somewhat confusing, but the robotic arm in use (KUKA KR240) is actually huge.
> Stone carving never disappeared, but rising costs pushed it out of ordinary construction
Why "rising costs" though? Are the carving tools significantly more expensive? Or did we just find a way to do shittier stuff with less expense and we called carving too expensive?
People like being paid in line with inflation etc, and theres likely a lot less stonemasons around today. It was probably a lot cheaper to get a marble carving made in ye olden days than now
The amount of people that actually know and do that kind of work has probably become very small while the demand might still be there. High demand, low supply -> usually increasing prices. There's generally a big decline in skilled trades and with that the same problem is coming up in other sectors as well.
I think estate developers just managed to somehow convince our regulators that copy pasting the same building across the world is unique and modern and we should do it.
We taught KUKA KR240 robots to carve carve marble sculptures end to end with autonomous toolpathing and simulation, starting with the Stanford bunny as a test case. Here’s how it goes from 3D model to finished sculpture using voxel representations and geodesic path planning.
Cool work! Could you maybe say a few sentences about where/how specifically this improves on the current state of the art? I was under the impression that whole monasteries in Italy are running fleets of CNC robots to create marble sculptures - is your process easier to set up, does it go further, does the old process need human finishing etc.? Thank you!
The words in the post look LLM generated. For some portion of us, that's offputting.
Aside from that, this stood out:
> our mission is to continue to work with artists and designers to decide on the final desired sculpture, and hand carvers to finalize the surface quality of many of our pieces.
This sounds good on the surface (hah) but it seems like it's only valid until the technology allows that work to be replaced too.
The profit chain will be how quickly they can replicate a block from a scan of a real block in need of restoration. I have seen countless documentaries on the restoration of old buildings, with the inevitable interviews with stonemasons about how many hours go into each block. The ability to auto-chisel a replica from a scan of an original would radically reduce the cost of restoring old structures.
Redoing the blocks by hand is the whole point. It is experimental archaeology, on top of preserving (and rediscovering lost) old techniques. Your suggestion is useless, counterproductive (where will we find the subject matter experts in old techniques once you kill their jobs?) and ridiculous ("profit chain"... Do you even know how little money there is in restoration?).
>the inevitable interviews with stonemasons about how many hours go into each block
Yeah, it is a point a pride, not a problem to be solved. And they will put their signature on the blocks they sculpted, like their predecessors and the predecessors before them, and someone in a century or a millenium will notice it. That's a form of eternity the tech bros will never attain.
1) A great podcast about why we're bad at statues in the US:
https://slate.com/podcasts/decoder-ring/2026/07/how-taste-po...
2) This isn't a particularly interesting model to sculpt. The parent model is a scan of a ceramic rabbit, and it doesn't have crisp details like really good marble sculptures do.
I have seen Venus Victrix[0] in person, and the detail in the mattress the figure is lying on is absolutely transfixing. You would swear the marble would softly yield if you put your finger on it. There's a detail rendered around the edge of the mattress that likely represents embroidery and it's unbelievably crisp, even as it follows the folds and creases in the mattress.
If we're going to have robots sculpt marble, that is the standard we should be reaching for. If we're reaching for that, I think we're going to find that modeling the finished product in 3d is going to be a significant fraction of the work of actually carving it in stone. I think we're also going to find that the mastery also lies in the tiny decisions the sculptor makes as they work, informed by how light plays off the material in different directions in real time throughout the day.
Can the process in the article achieve results suitable for mounting at the top of a building and viewed from ground level? Probably, and if not now, certainly with time. Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.
[0] https://en.wikipedia.org/wiki/Venus_Victrix_(Canova) Seriously, this and Bernini's David, also at the Galleria Borghese, are worth the trip to Rome to see. If there were nothing else in Rome worth seeing and the food was terrible, they would justify the pilgrimage on their own.
But now, "... our system turns a 3D model and a block of marble into a finished sculpture, with no human in the loop."
I'm not judging one way or the other. I have 0 skin in this debate. I just find situations like that interesting; like trying to douse a publicity fire while secretly making wildfire
But part of the reason I find carved statues to be impressive and monumental is the technical human feat and the craftsmanship. Looking at them, you can sort of feel the work they must have required.
Mass produced goods aren't inherently bad; but there is something lost in translation for pieces like this, IMO.
Why "rising costs" though? Are the carving tools significantly more expensive? Or did we just find a way to do shittier stuff with less expense and we called carving too expensive?
What does this mean exactly? Is the robot not being fed gcode?
Aside from that, this stood out:
> our mission is to continue to work with artists and designers to decide on the final desired sculpture, and hand carvers to finalize the surface quality of many of our pieces.
This sounds good on the surface (hah) but it seems like it's only valid until the technology allows that work to be replaced too.
>the inevitable interviews with stonemasons about how many hours go into each block
Yeah, it is a point a pride, not a problem to be solved. And they will put their signature on the blocks they sculpted, like their predecessors and the predecessors before them, and someone in a century or a millenium will notice it. That's a form of eternity the tech bros will never attain.