I like the Trofast system for making stuff for storing kids toys and organizing their rooms. Honestly there is a lot to love and customize about their offerings for kids and luckily the good stuff also gets picked up by other manufacturers/suppliers, so you get access to other things that go together - furniture too, but also stickers, and other functional decor stuff. Because kids grow up fast and you may be swapping/change their stuff more often, it’s a god send to have these to help out.
An architect friend of mine once said that he admired IKEA above all other furniture manufacturers because it made a modern range of aesthetics available to the masses. IKEA had done more to evolve the public taste than any other manufacturer.
And I do have to agree. I can remember what ghastly furniture most shops used to have around here. There was a lot of what we call "cabin furniture" - which isn't made to look good, just be practical. (Well, some people like that look, but it is a bit...dull). Sure, there was more solid wood furniture, but guess what: that durability comes at a cost. Not only in terms of money, but also in terms of how easy it was to install and move.
And who buys furniture to pass it on to your kids? Your kids will be unburdening themselves of your old furniture before you are in the ground.
As for quality: I have owned some pricey designer furniture and I can't say that I'm always impressed with the quality. Yes, if you have a lot more money you can get really well built furniture. But IKEA is more often than not more than sufficient quality. (Also see their "hidden tags" campaign)
If I pay $5000 for a chair I have reason to expect a lot from it. And more often than not, pricey furniture doesn't actually deliver sufficient quality to be able to defend the price. (Collectible furniture is a whole different deal where you don't actually care all that much about quality, but more about it being an original piece).
For those of you who look down on IKEA furniture, I'd like to hear about what alternatives you think need mentioning. Especially for young people or people of modest means. And I'm not trying to make some clever rhetorical point here. I can't really think of any company that offers what they offer and comparable quality, looks and price here in Europe.
IKEA furniture is great for small adjustments to fit your needs. Not costing a fortune also makes it easier to experiment with it.
Since they're so common, it's easy to find CAD drawings for most of them.
I did a small hack/conversion on a Billy closet to hide some pipes in our apartment.
https://vanderwalt.de/blog/customizing-ikea-billy-to-hide-pi...
My mind immediately went: I’m sure there is some German law or ordinance or regulation against hiding your Gaszähler. This surely goes against die Niederdruckanschlussverordnung.
Now that you have published this online, police will visit you to remove the Billy!
I really hope not! But it does look much better this way, it was an eyesore. And the regular heizung guys didnt complain when they saw it like this, so im assuming all is well
As long as you can easily slide it out of the way and it isn't fixed to the wall, it wouldn't be a problem for anyone who needs to service it. Therefore, it would not be against regulations, because all regulations in Germany are logical
Whenever I looked at using IKEA stuff to hack or incorporate into a larger build, the cost, effort, and quality never seemed worth it to me.
I built my current desk from some butcher block counter tops and shelfs and 4x4's. I don't think it cost me all that much more from what I could have done from IKEA and the quality is astronomically better.
If you're already dealing with saws and drills to hack the IKEA stuff, you really only need to toss is a sander and maybe a router and you can just work with real wood.
Eh, most IKEA desk hacks is to buy the wooden kitchen countertop, cut it to shape, and put it on some drawers. So you're not really describing anything different.
A butcher block desk with 4x4s for legs is pretty simple and forgiving. Matching the quality of appearance of a lot of other IKEA furniture would require quite a bit more skill and tools.
Like a Kallax, unless you're a real wizard you couldn't cobble one of those together without a lot of skill.
I have a few of those butcher block tops because I scaled down my shop, but I just can't throw them away. one was purchased 50+ years ago and my family used it as a breakfast table. they make excellent work benches and tables. they're robust and attractive. really all you need is a belt sander and some food safe mineral oil and you can completely resurface them if they get funky. I usually just weld a piece of 1/4" angle to a square plate for legs and weld a nut at the bottom for a threaded foot, but you can really do anything. it absolutely lovely to have a clean butcher block top for food preparation.
Most impressive / annoying thing about Ikea is how they keep value engineering products, some products are cheaper relative to inflation vs decades ago, but at the same time it be nice if they just settle one some "timeless" perennial basics like lego. The expedite -> kallax transition still lives rent free in my head, and my curse is being able to identify either sku from a distance.
I read, IKEA first wanted to have them closed down, but then they realized, it does not matter why someone buys their stuff, as long as they buy it.
I like Ikea. I lived in so many countries, and it is an excellent place to buy furniture if you have to. But I consider it "throw away" furniture. Quality is okay or soso and it is unlikely to survive several moves.
If you can afford and have a place for long term. Buy better stuff. Used quality furniture, even antique, can be incredibly cheap.
IKEA furniture can hold up very well if you follow the instructions precisely and don't disassemble them (in most cases).
We have furniture from IKEA that we bought at least five years ago that still functions great. A mattress we got from them is absolutely stellar with a memory foam topper; all of our guests love it. I think our coffee table is ten years old now.
However, everything goes to hell once you try to take it apart. This is why our mattresses are not on IKEA bed frames. Taking them apart has ALWAYS weakened them significantly. (We use Thuma Japanese joinery bed frames, which are AMAZING for moving and very high quality).
Which is kind of moot when you're talking about high-quality furniture, as they are usually single pieces as well.
For what is worth, I had an IKEA kitchen for 12+ years, we disassembled it and gave it to some people that could reuse it, and it's still fine. OTOH my IKEA couch fell apart in half that time, but my wife fixed it up and it lasted until we renovated. We gave that away too.
IKEA has a wide range of products, some fall apart quickly, some last longer.
No many real furniture out there with entire ecosystem of storage/containers sized for it. IKEA sheet/stamped metal stuff that introduced a few years ago will last forever.
I have several pieces that have survived 3-4 moves. The trick is when assembling, use wood glue with any dowels. On their own, these dowels only have friction to hold them in place, and over time, the surface of the area where they are inserted compresses, reducing friction. Hence you get that typical side to side sway. The glue mitigates this problem.
This makes any assembly 1-way, though. Some people (with a very high time:money ratio obviously) might find the collapsible, portable nature of Ikea an advantage.
I've owned a lot of IKEA furniture, and at no point have I ever considered disassembling them. And I don't think IKEA really even advertises their stuff to be a flatpack-to-furniture-to-flatpack design.
> If you can afford and have a place for long term. Buy better stuff. Used quality furniture, even antique, can be incredibly cheap.
IKEA is ideal for a certain stage of your life. It's ideal for optimizing vertical space. It's largely function over form. It looks like middle school classroom furniture. And when junior writes on it w/ a sharpie ¯\_(ツ)_/¯.
When you have the space for a separate dining room, agreed that used antiques are comparable in price.
I wouldn't touch their couches rich or poor though; they're painful.
It's very use and location dependent. I'm going to get a good or at least relatively good dining room table. Some cubbyholes/shelves for a closet? IKEA is fine. I also have an IKEA bureau in my bedroom. I occasionally wonder if I should have splurged on a "real" piece of furniture but it saved me thousands of dollars and is perfectly adequate.
One of the best furniture life hacks you can recognize is that you can replace the top panel of most self-assembly storage furniture items with a custom work surface suited to your usecase.
Take two drawer units, and instead of putting the tops on them they were supplied with, put a slab of desktop across both of them with a gap between and you’ve got yourself a desk.
I was thinking along the lines of Ikea-style furniture from scratch. Most local hardware stores carry these giant CNC routers, and the technicians there can cut particle board sheets to requirements.
How cool would it be if they offered a simplified furniture CAD program, where you could choose what material you need how many shelves of what size, etc and it would generate the needed program that would drill the required holes, and would tell you what size of screws and pins and dowels you need to pick up.
I definitely would use something like that, instead of trying to cut preexisting furniture to size.
> Most local hardware stores carry these giant CNC routers, and the technicians there can cut particle board sheets to requirements.
Do you mean local woodshop? CNCs that fit a full sheet-good are very large and expensive and not at your typical hardware store. Especially once they can load and unload, change bits.
Sheet-good sized CNC's are mostly for batch jobs do not really make sense economically for one off designs. You'd be better off with just panel and cabinet saws.
> How cool would it be if they offered a simplified furniture CAD program, where you could choose what material you need how many shelves of what size, etc and it would generate the needed program that would drill the required holes, and would tell you what size of screws and pins and dowels you need to pick up.
This is most modern cabinetry businesses now internally. Some companies have started offering direct to consumer products, but most are still b2b.
In Europe a CNC, or at least good and repeatable saw is available at large hardware stores. You can get any product cut to any shape precisely as long as it's a rectangle. I've not noticed one that offers more than this such as drilling holes.
But even if you were to get the wood cut and prepared perfectly, there's still a lot of skill to turn that into nice desk for example, with good joinery, veneer on exposed end grain, etc and a lot that can go wrong, and you are likely to end up with a worse result than a mass produced desk for a much higher price. This type of manufacturing can't compete at all with the cost optimizations that Ikea can do. So where you see B2C in this space is built-in furniture like for kitchens. This has a limited design space so a lot of the parts are standardized, and the design can be constrained to not have the end user work on details like exposed end grain. I guess this doesn't really have an alternative mass-produced option, so the price comparison is to hiring a contractor, so it makes sense as an offering.
But it's evidently hard to get right. If you go to an Ikea that sells returned goods, that section is filled with kitchen countertops cut to the wrong length (good source of cheap wood for projects by the way).
I've long been considering this idea as I make a lot of my own cabinetry, and would love to get automated cutting and drilling lists depending on if I'll use screws or dowel pins or some nice wooden joints.
In general, you always start with outside dimensions, board thickness, having a kick plate or not (eg. when you make it wheeled), will you chamfer/round the edges and then the rest is simple calculation. You add internal shelve/drawer dimensions and it can consider those too.
I had some scripts that worked with an older version of FreeCAD and printed the cutting list to a CSV, but it still was not the perfect solution.
Interestingly, local chipboard/MDF shops here in Serbia would do that as a service for you on their CNC machines (at additional cost, obviously :)).
I think you’re right, and there’s definitely potential for disruption of kitchen and also wardrobe offerings in some countries.
(I say some countries as IME there’s a huge difference in existing competition between countries. For example, I found that the kitchen options in Germany were hugely restricted vs. what I was used to in the UK.)
If you're interested in that I would search for a maker space or hacker space in your area. They usually have tools (like a CNC router) that would be far too expensive for an individual to buy and they let the public use them after taking a short class and paying a membership fee.
there's an place in Seattle, WA that does this called shelf.me for what looks like zero-hardware self designs.
my shop is next to a cabinet maker who does most of is work in that same birch hard-ply. he's got the full sheet router, but he only really uses it for special projects. its mostly just the big table saw. he's got a subcontractor that just does drawers. most cities have several of his kind of shop, and while they don't have a design website they generally work from napkins. I think that birch ply has gotten really expensive in the last 5 years though.
Look at the very popular Lack table, it's made from cardboard hexagons with four pieces of wood-like thing in the corners to hold the legs. You can't make that yourself for cheap, and just the material cost in eg. wood, would be more expensive than the full table in ikea.
Otherwise, there are many youtube channels specializing in woodworking where you can learn all the basics to design your own furniture, but it won't be cheap.
Billy bookcases though are just slabs of laminated engineered wood cut to rectangular dimensions, drilled with precision positioned and sized holes, plus a stack of dowels and camlock fasteners.
People like to complain about it not being solid wood but the furniture from Ikea, such as Lack and Kallax is fit for purpose and remains a low price despite the cost of wood going up a lot. And what you can get at a similar price point from Wal-Mart in North America, or Conforama in Europe, is much much worse quality. Especially the veneer which holds up from Ikea but is more like wallpaper if you spend the same price somewhere else.
It depends on your comparison; a Lack table is maybe an extreme example.
I say this because I’m currently working on a project to build a full kitchen’s worth of cabinet carcasses using good quality 19mm plywood, and I’m aiming for it to be cost neutral with Ikea’s kitchen cabinets, having sourced the plywood from a local DIY store. (Obviously ignoring the cost of my existing tools.)
Which is to say, if you could source plywood in volume (therefore cheaper per square meter) and amortise the cost of the CNC machine and other tools over time, I think it would be feasible to be close to cost competitive with IKEA‘s kitchens.
I'm not using CNC; I just agree with the previous poster that there's an opportunity. (I'd note that none of your subsequent post related to the comment you made about CNC?)
For my project, I believe 19mm is plenty for carcasses - just about every mass-produced kitchen uses 18/19mm chipboard frames, and they can last for decades, outside of abnormal abuse. The main reason for using the same size is easy compatibility with standard doors/fronts together with standard fitment hinges/runners, all of which I'll be purchasing. The tops will be either granite or concrete.
yeah, those cardboard tables.. I had to glue in 2-4 (5 by 10 cm) stringers and refix legs to them for it to hold a measly epson c8600 and even then it stands on wooden planks to distribute the load.
ikea is a great inspiration for making your own furniture and then a source for bearable spare parts.
As a Kallax enjoyer I used to hate that I was limited to ~32cm width and height, it took me years to realize that I can just remove some of the dividers and make the nooks either wider or taller if I rotate (!) the shelf. It obviously affects load carrying capacity, but it's still plenty strong if you are smart about it.
Creating luxury closets from the modest PAX platform is my favorite Ikea hack read (currently working on such project). And by the way, the non-nerds take it to a different level.
For functional sturdy furniture like this, if you are OK with the look, you can make the base/frame from aluminium 80/20 extrusions (the kind with t-slots and all kinds of standard brackets etc for fastening them together). Misumi has a simple CAD interface to design a complete unit, and this generates a single part number for you to purchase everything cut to length, with holes if needed, and all required accessories and fasteners to assemble it. You can easily add a wooden countertop or shelves if desired.
It's not very cheap but it's infinitely configurable (unlike Ikea hacks) and doesn't require much skill (unlike building from wood at least if you want it to look OK).
I couldn't find any kind of an enclosure that fits the TidyCat Breeze XL litter box. The toy box drawer (Smastad) was big enough, so I cut an entry hole on one side, and a hole on the back side for removing the pad insert.
Anymore I almost don't buy any IKEA stuff without intending some modification. I do woodworking as a hobby so it's nice to be able to skip all the rote stuff like building a large flat wooden surface or a square box or table legs. I can just focus on building a highly focused and functional piece of furniture for my space.
I love KALLAX the most of all IKEA series. Sturdy as heck, can take a lot of weight, extremely versatile and durable. I've used it as a bookshelf, for putting boxes away, as a wardrobe organizer, you name it. Oh and the price is right. Nothing else comes close.
I used to spend hours pouring over the https://ikeahackers.net/ site - but never actually hacked much of our furniture (no more than adjusting the height, or changing handles/worktops).
As cheap as Ikea was, being in London in my 20s just as Freecycle started, meant we ended up with a lot 'vintage' furniture for free or next to nothing - some we still have now.
A non-hack I learned about yesterday. I was taking apart an IKEA dining room table. The screws and bolts were obvious, but the top would not separate from the frame.
After much parsing of the assembly manual (which took some effort to find online since they don't make this model any more), I realized that the top had slid over a knobbly dowel. Pulling horizontally popped it off.
I Sharpied the directions on the bottom before I reassembled it. We'll see if far-future me can figure out what I meant.
Re: the slight wobble, you should be able to find some inexpensive thin-sheet backing board at a hardware store. Use small ribbed tacking nails or glue around the edges to attach it at the back, and it should help stabilize and prevent racking.
The low cost makes it perfect for diy as for an amateur you know that you have the safety to be able to easily buy a new unit if you screw up.
Looking into ideas, I was a little bit disappointed to not find community website of people sharing ideas, experiences and results around such hacking.
In 2014, IKEA made headlines when its legal team sent a cease-and-desist letter to Jules Yap, the founder of IKEA Hackers, demanding that she hand over the domain name. Good to see the site still online, after the PR department took note that legal teams were not-only filing useful claims.
Ever since then, I avoid sharing pictures of IKEA furniture. Like Mattel, suing barbie blogs of children. If I did not design it, I won't share a picture of it. Even building architects will sometimes sue if you photograph the house.
> Even building architects will sometimes sue if you photograph the house.
? In the US there's the 1a - you can photograph anything you can see (from a public place).
In the there's the assumption you can photograph anything without a 'do not photo, military dogs' etc.
Never heard of a non-publishable building. Even gchq can be photo's.
And I do have to agree. I can remember what ghastly furniture most shops used to have around here. There was a lot of what we call "cabin furniture" - which isn't made to look good, just be practical. (Well, some people like that look, but it is a bit...dull). Sure, there was more solid wood furniture, but guess what: that durability comes at a cost. Not only in terms of money, but also in terms of how easy it was to install and move.
And who buys furniture to pass it on to your kids? Your kids will be unburdening themselves of your old furniture before you are in the ground.
As for quality: I have owned some pricey designer furniture and I can't say that I'm always impressed with the quality. Yes, if you have a lot more money you can get really well built furniture. But IKEA is more often than not more than sufficient quality. (Also see their "hidden tags" campaign)
If I pay $5000 for a chair I have reason to expect a lot from it. And more often than not, pricey furniture doesn't actually deliver sufficient quality to be able to defend the price. (Collectible furniture is a whole different deal where you don't actually care all that much about quality, but more about it being an original piece).
For those of you who look down on IKEA furniture, I'd like to hear about what alternatives you think need mentioning. Especially for young people or people of modest means. And I'm not trying to make some clever rhetorical point here. I can't really think of any company that offers what they offer and comparable quality, looks and price here in Europe.
Now that you have published this online, police will visit you to remove the Billy!
Perhaps I am too pessimistic with German laws.
PS: It looks much better this way.
One high and one low one, this is so the gas does not build up in case of a leak.
Would highly suggest you get that sorted, your insurance might be void in case you do get a fire.
Now I will either get older recycled furniture for quality or pieces from IKEA for cost.
I built my current desk from some butcher block counter tops and shelfs and 4x4's. I don't think it cost me all that much more from what I could have done from IKEA and the quality is astronomically better.
If you're already dealing with saws and drills to hack the IKEA stuff, you really only need to toss is a sander and maybe a router and you can just work with real wood.
Like a Kallax, unless you're a real wizard you couldn't cobble one of those together without a lot of skill.
I read, IKEA first wanted to have them closed down, but then they realized, it does not matter why someone buys their stuff, as long as they buy it.
I like Ikea. I lived in so many countries, and it is an excellent place to buy furniture if you have to. But I consider it "throw away" furniture. Quality is okay or soso and it is unlikely to survive several moves.
If you can afford and have a place for long term. Buy better stuff. Used quality furniture, even antique, can be incredibly cheap.
We have furniture from IKEA that we bought at least five years ago that still functions great. A mattress we got from them is absolutely stellar with a memory foam topper; all of our guests love it. I think our coffee table is ten years old now.
However, everything goes to hell once you try to take it apart. This is why our mattresses are not on IKEA bed frames. Taking them apart has ALWAYS weakened them significantly. (We use Thuma Japanese joinery bed frames, which are AMAZING for moving and very high quality).
Which is kind of moot when you're talking about high-quality furniture, as they are usually single pieces as well.
IKEA has a wide range of products, some fall apart quickly, some last longer.
I have several pieces that have survived 3-4 moves. The trick is when assembling, use wood glue with any dowels. On their own, these dowels only have friction to hold them in place, and over time, the surface of the area where they are inserted compresses, reducing friction. Hence you get that typical side to side sway. The glue mitigates this problem.
IKEA is ideal for a certain stage of your life. It's ideal for optimizing vertical space. It's largely function over form. It looks like middle school classroom furniture. And when junior writes on it w/ a sharpie ¯\_(ツ)_/¯.
When you have the space for a separate dining room, agreed that used antiques are comparable in price.
I wouldn't touch their couches rich or poor though; they're painful.
Take two drawer units, and instead of putting the tops on them they were supplied with, put a slab of desktop across both of them with a gap between and you’ve got yourself a desk.
How cool would it be if they offered a simplified furniture CAD program, where you could choose what material you need how many shelves of what size, etc and it would generate the needed program that would drill the required holes, and would tell you what size of screws and pins and dowels you need to pick up.
I definitely would use something like that, instead of trying to cut preexisting furniture to size.
Do you mean local woodshop? CNCs that fit a full sheet-good are very large and expensive and not at your typical hardware store. Especially once they can load and unload, change bits.
Sheet-good sized CNC's are mostly for batch jobs do not really make sense economically for one off designs. You'd be better off with just panel and cabinet saws.
> How cool would it be if they offered a simplified furniture CAD program, where you could choose what material you need how many shelves of what size, etc and it would generate the needed program that would drill the required holes, and would tell you what size of screws and pins and dowels you need to pick up.
This is most modern cabinetry businesses now internally. Some companies have started offering direct to consumer products, but most are still b2b.
But even if you were to get the wood cut and prepared perfectly, there's still a lot of skill to turn that into nice desk for example, with good joinery, veneer on exposed end grain, etc and a lot that can go wrong, and you are likely to end up with a worse result than a mass produced desk for a much higher price. This type of manufacturing can't compete at all with the cost optimizations that Ikea can do. So where you see B2C in this space is built-in furniture like for kitchens. This has a limited design space so a lot of the parts are standardized, and the design can be constrained to not have the end user work on details like exposed end grain. I guess this doesn't really have an alternative mass-produced option, so the price comparison is to hiring a contractor, so it makes sense as an offering.
But it's evidently hard to get right. If you go to an Ikea that sells returned goods, that section is filled with kitchen countertops cut to the wrong length (good source of cheap wood for projects by the way).
In general, you always start with outside dimensions, board thickness, having a kick plate or not (eg. when you make it wheeled), will you chamfer/round the edges and then the rest is simple calculation. You add internal shelve/drawer dimensions and it can consider those too.
I had some scripts that worked with an older version of FreeCAD and printed the cutting list to a CSV, but it still was not the perfect solution.
Interestingly, local chipboard/MDF shops here in Serbia would do that as a service for you on their CNC machines (at additional cost, obviously :)).
(I say some countries as IME there’s a huge difference in existing competition between countries. For example, I found that the kitchen options in Germany were hugely restricted vs. what I was used to in the UK.)
my shop is next to a cabinet maker who does most of is work in that same birch hard-ply. he's got the full sheet router, but he only really uses it for special projects. its mostly just the big table saw. he's got a subcontractor that just does drawers. most cities have several of his kind of shop, and while they don't have a design website they generally work from napkins. I think that birch ply has gotten really expensive in the last 5 years though.
Look at the very popular Lack table, it's made from cardboard hexagons with four pieces of wood-like thing in the corners to hold the legs. You can't make that yourself for cheap, and just the material cost in eg. wood, would be more expensive than the full table in ikea.
Otherwise, there are many youtube channels specializing in woodworking where you can learn all the basics to design your own furniture, but it won't be cheap.
That seems parameterizable.
I say this because I’m currently working on a project to build a full kitchen’s worth of cabinet carcasses using good quality 19mm plywood, and I’m aiming for it to be cost neutral with Ikea’s kitchen cabinets, having sourced the plywood from a local DIY store. (Obviously ignoring the cost of my existing tools.)
Which is to say, if you could source plywood in volume (therefore cheaper per square meter) and amortise the cost of the CNC machine and other tools over time, I think it would be feasible to be close to cost competitive with IKEA‘s kitchens.
But CNC isn't the silver bullet. What I ended up with is 25mm glued wood for frames, 55mm for tops and 15mm plywood plus veneer for facades.
If you use 19mm for frames, you won't have enough strength for hinges, which would inevitably be abused.
If you use 19mm for tops, they will sag and vibrate. The best top I have is actually 55mm IKEA glued oak.
For my project, I believe 19mm is plenty for carcasses - just about every mass-produced kitchen uses 18/19mm chipboard frames, and they can last for decades, outside of abnormal abuse. The main reason for using the same size is easy compatibility with standard doors/fronts together with standard fitment hinges/runners, all of which I'll be purchasing. The tops will be either granite or concrete.
ikea is a great inspiration for making your own furniture and then a source for bearable spare parts.
https://archiyou.com/articles/enzo-mari-s-autoprogettazione-...
https://erinkestenbaum.com/2018/12/12/hacking-the-ikea-pax-i...
It's not very cheap but it's infinitely configurable (unlike Ikea hacks) and doesn't require much skill (unlike building from wood at least if you want it to look OK).
As cheap as Ikea was, being in London in my 20s just as Freecycle started, meant we ended up with a lot 'vintage' furniture for free or next to nothing - some we still have now.
After much parsing of the assembly manual (which took some effort to find online since they don't make this model any more), I realized that the top had slid over a knobbly dowel. Pulling horizontally popped it off.
I Sharpied the directions on the bottom before I reassembled it. We'll see if far-future me can figure out what I meant.
Looking into ideas, I was a little bit disappointed to not find community website of people sharing ideas, experiences and results around such hacking.
Ever since then, I avoid sharing pictures of IKEA furniture. Like Mattel, suing barbie blogs of children. If I did not design it, I won't share a picture of it. Even building architects will sometimes sue if you photograph the house.
? In the US there's the 1a - you can photograph anything you can see (from a public place). In the there's the assumption you can photograph anything without a 'do not photo, military dogs' etc. Never heard of a non-publishable building. Even gchq can be photo's.
Just because you can photograph it does not mean you can necessarily publish it. IP rights are a recognized exception to the 1a