I just go under and over one more time in the initial step of tying a traditional "shoelace" knot. That gives a little more friction on the initial tightening draw to keep it in place, then just finish it as normal.
I've tried alternatives, but in the end keeping it simple is what I prefer.
I did this for a while after seeing that video, but after some of my shorts ended up tightening into a knot that I couldn't get loose easily, I gave up on it.
I instead just use the "Ian Knot" that I use to tie my shoes. It's very quick, I already use it all the time anyhow, and it rarely goes wrong. (Sometimes, I think I end up with an end through a loop accidentally, and have to fix it.)
Learning this extra knot didn't really help much, and it definitely went wrong more than I liked.
You could also say life is too short to waste time retying inferior drawstrings. If learning the knot takes 5 minutes, it seems like it could easily save you time overall.
If it takes 5 minutes to learn, and if you have 30 more years of needing to tie drawstrings, and you need to tie on average one drawstring per week, you will come out ahead if it saves you 0.19 seconds tying or retying per drawstring.
Here is how to tie a bow in under 1 second in case anyone wants something that looks a bit cleaner but is less functional: https://m.youtube.com/shorts/Q5qZpQe_4EA
This knot is not for me. I need my drawstrings to be permanently connected together, or else when I wash those shorts they frequently get pulled into the pants where I can't reach them, and it's a pain to fish them out again. And I can't remember to tie them together before each wash.
Gosh I need to learn more about knots. I've been thinking about this recently: if I wanted to maximise utility and could only learn 5 knots, what would they be.
Or alternatively, what are the "better" alternatives to the classics everyone knows.
Knowing common knots is not just useful because they are handy, but they also represent a common toolkit - when sailing with someone, if I see they tie a certain thing with a specific knot, I can do likewise. When I see a knot I recognise, I immediately know how to untie and re-tie it.
Generally the same point about having a common vocabulary in tech work. Sometimes it's about stuff that's obvious to both parties in one way or another - but the name is what ties it together (heh).
The marlinspike hitch is the best bang-for-your-buck. The author of this video shows it in quite a few of his other videos. Depending on what you do with the tag end, you can quickly collapse it into a bowline for a fixed loop (and subsequently apply any bowline finishing you might like), or you can end up with an Ashley stopper (which provides triple the diameter of the rope, so is an excellent stopper). Using it actually as a marlinspike hitch gives you a really nice handle to pull in tension on a trucker’s hitch. The knot also does not jam, so you can easily pull it out just by completely tightening it. This same property makes it an excellent choice for the loop in a trucker’s hitch… provided you get the directionality right so the force of pulling in tension counteracts its desire to collapse. When you’re done, the loop can just collapse out when you untie it—no dealing with a jammed alpine butterfly.
The bowline has two variants, one being the cowboy version, which has the working bitter end on the outside of the loop, the "normal" bowline will have it on the inside of the loop.
To tie a bowline, make a loop in the working bitter end up about 2x the desired circumference of the loop you want to make. Your line is now segmented into the bitter end, and the standing line section.
Look at the loop. You want to put the bitter end through the same side of the hole where the bitter end overlaps the line/rope on the other side of the loop (standing section). If you use your right hand to twist the loop, and do so clockwise, you will insert the bitter end from the top. If you turn it counter-clockwise, then you will insert it from the bottom.
In this orientation, if you go around behind the right side of the standing part, you will form a normal bowline. If you go around behind on the left, this will form a "cowboy" bowline. Either works, but the cowboy one allows the bitter end to hang loose, which increases the odds of it getting caught up in other lines.
Finish by inserting the bitter end into the same hole from the other direction (obviously).
If you find the knot comes undone, you are putting it through the wrong side of the hole at the start. Just insert it in the other side and this particular problem solves itself. If you are on a boat, other problems may now be selected for attack. :P
Strongly agreed, and thank you - TIL about the truckee hitch, I've always been using trucker's hitches and now I'm going to go try to reprogram myself.
I'd add a butterfly loop to this list for those times you need to add a tie-in point to the middle of a rope for whatever reason.
The Farrimond Hitch is my favorite knot. Useful to tie a line to another line and have it adjustable, but strong under load and a single pull to undo it. Easy to remember, it's like a prusik knot.
There is a reason scouts require you to tie so many knots. Not that any scout remembers their knots longer than needed pass that requirement, but it is still important and once in a while they do need them.
The scouts require a bunch of utterly terrible knots. They include the Granny Knot which you never actually want to tie, only to avoid tying by accident. They include the Sheepshank, which is quite possibly the worst way to shorten a line ever invented. Etc.
IMO it's important to start with what possible uses of knots there are, and then learn a knot for each use. I'll exclude decorative knots, because those are subjective & very diverse.
Stopper knots prevent rope from passing through a hole & keep the end from unraveling. The Overhand knot is the simplest. The Double Overhand is a very simple addition to an overhand. The Figure-8 is slightly bigger, and useful to know.
Single loop knots create a single fixed loop in a line. The Butterfly (aka Alpine Butterfly) can be tied mid-line (without access to the end) or with the end of a rope, and is two overhand knots interlocked in a particular manner.
A noose is any loop that tightens when a load is applied. I like the Scaffold Knot, it's a double overhand around the standing part of the rope. Its biggest disadvantage is it can be difficult to undo. Any fixed loop can also be made into a noose by tying it around the standing part, forming a "Running <name of fixed loop>".
Bends join the ends of two ropes. The Fisherman's knot (also has lots of other names) is two overhand knots, one with each rope, tied around the standing part of the other rope. It's strong, secure, but difficult to untie. The Double Fisherman's uses double overhands. The Butterfly Bend is a Butterfly tied as a bend, it's strong, secure, and much easier to untie. The Butterfly Bend is tied the same way the Butterfly Loop is when tying with the end.
Hitches tie a rope to a rigid object. They can attach a rope to something where you have access to an end of the object like a bollard, or where you don't like tying into a fixed ring. They can be for lengthwise pulls, or for right-angle pulls. Adjustable loops are hitches tied around the standing part of the rope. For right-angle pull, the scaffold knot works well (again). It can be tied without access to the end of an object, so it works for rings and bollards. For lengthwise pull, the rolling hitch is nice, and the Rolling Hitch Ziptie is a use of the rolling hitch which works as an adjustable loop and a binding knot.
Binding knots hold only when tied around an object. The Double-Slipped Reef Knot is a common shoelace knot. The Turquoise Turtle or "Ian's Secure Shoelace Knot" are different methods of tying a structurally identical resulting knot that's a bit more secure. Worth knowing at least one of these three, or you'll only wear slip-ons or Velcro closure shoes. Also the Rolling Hitch Ziptie is worth knowing.
There are also some systems of knots called "trucker's hitch"es, which are all ways to use loop knots as improvised pulleys with a final hitch to secure a load in place. IMO they're not independent knots. Handy to know at least one sort though in case you don't have ratchet straps or snatch blocks. The Versatackle is nice, self-locking, and tied with just Alpine Butterflies and any hitch.
So, a list of 5:
1: Overhand knot. 2: Butterfly loop (mid-line). 3: Butterfly loop (with the end). 3 (used differently): Running Butterfly. 3 (used differently): Butterfly bend. 4: Scaffold knot. 5: Rolling Hitch. 5 (used differently): Rolling Hitch Ziptie. 5 (used differently): two opposed Rolling Hitches for tying your shoelaces together works, with difficulty. 2+5: Versatackle trucker's hitch formed from two Butterfly loops and a Rolling Hitch.
All except the Rolling Hitch are based on the Overhand knot. If you're willing to add a sixth knot, pick something better to tie your shoes.
I've spent waaay to much time thinking about this over the past few years and have really gotten into knots.
Personally I'd say you need to classify the type of knots you want to learn and pick one knot from each. The classics in my opinion are
1. End loop
2. Mid loop
3. Hitch (opposite of an end loop)
4. adjustable loop
5. Bend (rope to rope)
My suggestions in order are
# End Loop
1a. Bowline (snap variant) - This is a knot that's super easy to tie, remember, and untie. There are a bunch of variants to expand it's usefulness (double, water, slip, yosemite, etc)
1b. Zeppelin Loop - this is my personal favorite, it's a little tricky to tie but I've never seen it slip and it unties easily after it's all done.
# Mid Loop
2a. Alpine Butterfly - learn the butterfly method and this is an easy to tie knot that can be easily sized. It also doesn't bind so it unties easily and can be loaded in any direction (on of the only midline knots this is true for)
2b. Bowline on a Bight - Super satisfying knot to tie, a little wonky to learn just because of the structure but easy to tie once you get it.
# Hitch
3a. Tensionless Hitch - (this is probably the most overlooked 'knot' just look at a diagram you can learn it and never forget it after seeing the diagram once. It's the strongest knot there is if you have the rope for it. (I wouldn't really count this at one of your 5 but it's good to keep in mind)
3b. Buntline Hitch - dead simple and you can usually untie it after a heavy load
3c. Siberian Hitch - This is effectively a slipped noose but I use it all the time, it's my personal go to.
3c. Poachers knot - If you have a carabiner or know you're never going to need to untie this knot it's hard to beat
# Adjustable Loop / Friction Hitch
4a. Adjustable Grip Hitch - Easy to learn and holds better than the Midshipman's
4b. Midshipman - it's a little more complicated but this was Ashley's favorite because it can be tied under tension
# Bend
(Bends and fixed loops usually have the same structure so you might not need this one)
5a. Zeppelin Bend - seriously just learn this one, sixty nine method is the easiest for me. Knot is easy to tie, doesn't slip, and is easy to untie.
5b. Sheet Bend - this knot... is fine but you already know it if you learned the bowline above as it's the same structure
Bonus Section
1. Trucker/Truckee - probably one of the most useful knots around, learn the method that uses a slip knot for the mid loop and it'll make even easier
2. Canadian Jam Knot - Useful for bundling things, it's a knot I find myself using a lot
3. Voodoo Hitch - You can use it in place of a ratchet strap if you have a couple of carabiners
4. Icicle Hitch - Ever wanted to tie a rope to a butter metal pole and keep it from slipping? This is the knot, it cinches and grips things with so much friction you can tie a rope to about anything vaguely cylindrical
Just by the headline I suspected this was first class amateur. So many great videos.
That being said, use cord locks, not knots. You can often shorten the drawstring, and you will never lose one end into the waist.
I learned this knot from this video a while back -- I've used it ever since. It cinches the shorts tight, but is easy to release. It works especially well on strings that are slippery and don't hold a typical bow very well.
One drawback is that the two ends often end up different lengths, but otherwise it's a great knot!
I love how new people keep discovering Ian's website (cf the xkcd 1053). It's a really well made website, the pictures and animations are very well chosen to explain knots and lacing.
I favor a technique I was taught by a nursing student almost 30 years ago. You basically use the usual technique but each time the lace crosses another do it one extra time.
So first you wrap one lace around the other and pull it tight, well before you pull it tight wrap it around one more time. This helps hold the laces tight for the next step where you fold the laces and wrap them around each other. Do that a second time as well before you pull it fully tight.
Without video or illustration I suspect this is not easy to follow. Oh well.
A few years back I got a couple of Adidas running shorts. Instead of the typical drawstring they had some continuous string. To this day I've no idea how it was supposed to be used, I just cut it off and voila, a regular drawstring.
You can tie the same knots without cutting the string. Just grab the two sides, pull them snug, then tie the knot. The fact that the “free ends” are connected at a distance doesn’t prevent the knot from holding like usual.
The advantage of the continuous loop is that it can’t end up inside the waistband during laundry.
Once I had a pair of the continuous loop sweats, I turned all my sweats into the same. My drawstrings always seem to end up getting retracted into the pants.
I’ve been giving this a try, and aside from Porky Pigging it through my kitchen this morning, it seems to have real promise. The rip cord isn’t a feature I value, though.
Ever since I was a scout in the 90s I've been considering how to get in contact with them about discouraging use of the square knot.
The way that loading it crosswise causes it to shift into a double half hitch, turning from a "hold fast" knot to a slipknot... That's funky behavior and should disqualify it from being among the first few knots people learn. If you're using it for its advertised purpose, it's downright dangerous, and the square/granny confusion is just needless pain to discourage a newbie.
If you wanna tie two ropes together and have a less finicky experience, use a fisherman's knot. Which is basically a pair of overhands, each around the other rope.
It's a much more reliable knot for trying two ropes together, lacks the annoying gotchas of the square knot, and for a long list of reasons I won't bore you with here it is a better foundation for learning other knots. (It's no good for drawstrings though, too reliable, no quick release).
As long as you switch directions when tying a bunny ears knot, it will stay tied. I do left over/right under for the first step and then left under/right over for the second step. The ears/loops should sit balanced and not lopsided. I use the same knot to tie my shoes.
just start with a double square knot (or whatever the first step is called) and pull it tight before starting the bow. it won't move while you tie the bow, and it's so much easier than this. if you have particularly slippery substrate, start with a triple instead
A reef knot (or square knot) cannot be adjusted or tied under load. When you tie the second crossing, the first one always loosens a bit. The lapp knot in the video can be tensioned properly after tying, which is pretty slick.
I've tried alternatives, but in the end keeping it simple is what I prefer.
I instead just use the "Ian Knot" that I use to tie my shoes. It's very quick, I already use it all the time anyhow, and it rarely goes wrong. (Sometimes, I think I end up with an end through a loop accidentally, and have to fix it.)
Learning this extra knot didn't really help much, and it definitely went wrong more than I liked.
https://xkcd.com/1205/
(I swear there was a better one)
Here's an adjustable knot for if you've got a continuous drawstring like on a hat or sweatpants
Here is how to tie a bow in under 1 second in case anyone wants something that looks a bit cleaner but is less functional: https://m.youtube.com/shorts/Q5qZpQe_4EA
I also cannot help myself but look down at people that don't use it, shoelace normies.
I think its the same Knot. I really like Ian's Secure Knot too: https://www.fieggen.com/shoelace/secureknot.htm
"Hey, that's the Ian Knot!"
https://youtube.com/shorts/1I9_Zxypg1s
https://www.youtube.com/shorts/YCBD8l7Sg3M
Or alternatively, what are the "better" alternatives to the classics everyone knows.
My favourite knot is the bowline. Non-slip loop, very strong, easy to tie, easy to undo. Can be used for tying two ropes together, ropes to things.
Other useful ones (especially for sailing)
* Clove hitch * Reef knot * Rolling hitch * Sheet bend
I think that method was originally taught to me in scouts as an emergency body lift thing, though it would not actually be ideal for that.
Edit: Same knot, with an explanation before showing what I knew as the classic trucker hitch https://www.youtube.com/watch?v=TKM5gaYJWN0
To tie a bowline, make a loop in the working bitter end up about 2x the desired circumference of the loop you want to make. Your line is now segmented into the bitter end, and the standing line section.
Look at the loop. You want to put the bitter end through the same side of the hole where the bitter end overlaps the line/rope on the other side of the loop (standing section). If you use your right hand to twist the loop, and do so clockwise, you will insert the bitter end from the top. If you turn it counter-clockwise, then you will insert it from the bottom.
In this orientation, if you go around behind the right side of the standing part, you will form a normal bowline. If you go around behind on the left, this will form a "cowboy" bowline. Either works, but the cowboy one allows the bitter end to hang loose, which increases the odds of it getting caught up in other lines.
Finish by inserting the bitter end into the same hole from the other direction (obviously).
If you find the knot comes undone, you are putting it through the wrong side of the hole at the start. Just insert it in the other side and this particular problem solves itself. If you are on a boat, other problems may now be selected for attack. :P
I'd add a butterfly loop to this list for those times you need to add a tie-in point to the middle of a rope for whatever reason.
https://www.animatedknots.com/farrimond-friction-hitch-knot
(overhand and double 8 are probably used more often by me, but not that versatile)
Stopper knots prevent rope from passing through a hole & keep the end from unraveling. The Overhand knot is the simplest. The Double Overhand is a very simple addition to an overhand. The Figure-8 is slightly bigger, and useful to know.
Single loop knots create a single fixed loop in a line. The Butterfly (aka Alpine Butterfly) can be tied mid-line (without access to the end) or with the end of a rope, and is two overhand knots interlocked in a particular manner.
A noose is any loop that tightens when a load is applied. I like the Scaffold Knot, it's a double overhand around the standing part of the rope. Its biggest disadvantage is it can be difficult to undo. Any fixed loop can also be made into a noose by tying it around the standing part, forming a "Running <name of fixed loop>".
Bends join the ends of two ropes. The Fisherman's knot (also has lots of other names) is two overhand knots, one with each rope, tied around the standing part of the other rope. It's strong, secure, but difficult to untie. The Double Fisherman's uses double overhands. The Butterfly Bend is a Butterfly tied as a bend, it's strong, secure, and much easier to untie. The Butterfly Bend is tied the same way the Butterfly Loop is when tying with the end.
Hitches tie a rope to a rigid object. They can attach a rope to something where you have access to an end of the object like a bollard, or where you don't like tying into a fixed ring. They can be for lengthwise pulls, or for right-angle pulls. Adjustable loops are hitches tied around the standing part of the rope. For right-angle pull, the scaffold knot works well (again). It can be tied without access to the end of an object, so it works for rings and bollards. For lengthwise pull, the rolling hitch is nice, and the Rolling Hitch Ziptie is a use of the rolling hitch which works as an adjustable loop and a binding knot.
Binding knots hold only when tied around an object. The Double-Slipped Reef Knot is a common shoelace knot. The Turquoise Turtle or "Ian's Secure Shoelace Knot" are different methods of tying a structurally identical resulting knot that's a bit more secure. Worth knowing at least one of these three, or you'll only wear slip-ons or Velcro closure shoes. Also the Rolling Hitch Ziptie is worth knowing.
There are also some systems of knots called "trucker's hitch"es, which are all ways to use loop knots as improvised pulleys with a final hitch to secure a load in place. IMO they're not independent knots. Handy to know at least one sort though in case you don't have ratchet straps or snatch blocks. The Versatackle is nice, self-locking, and tied with just Alpine Butterflies and any hitch.
So, a list of 5:
1: Overhand knot. 2: Butterfly loop (mid-line). 3: Butterfly loop (with the end). 3 (used differently): Running Butterfly. 3 (used differently): Butterfly bend. 4: Scaffold knot. 5: Rolling Hitch. 5 (used differently): Rolling Hitch Ziptie. 5 (used differently): two opposed Rolling Hitches for tying your shoelaces together works, with difficulty. 2+5: Versatackle trucker's hitch formed from two Butterfly loops and a Rolling Hitch.
All except the Rolling Hitch are based on the Overhand knot. If you're willing to add a sixth knot, pick something better to tie your shoes.
Personally I'd say you need to classify the type of knots you want to learn and pick one knot from each. The classics in my opinion are
1. End loop
2. Mid loop
3. Hitch (opposite of an end loop)
4. adjustable loop
5. Bend (rope to rope)
My suggestions in order are
# End Loop
1a. Bowline (snap variant) - This is a knot that's super easy to tie, remember, and untie. There are a bunch of variants to expand it's usefulness (double, water, slip, yosemite, etc)
1b. Zeppelin Loop - this is my personal favorite, it's a little tricky to tie but I've never seen it slip and it unties easily after it's all done.
# Mid Loop
2a. Alpine Butterfly - learn the butterfly method and this is an easy to tie knot that can be easily sized. It also doesn't bind so it unties easily and can be loaded in any direction (on of the only midline knots this is true for)
2b. Bowline on a Bight - Super satisfying knot to tie, a little wonky to learn just because of the structure but easy to tie once you get it.
# Hitch
3a. Tensionless Hitch - (this is probably the most overlooked 'knot' just look at a diagram you can learn it and never forget it after seeing the diagram once. It's the strongest knot there is if you have the rope for it. (I wouldn't really count this at one of your 5 but it's good to keep in mind)
3b. Buntline Hitch - dead simple and you can usually untie it after a heavy load 3c. Siberian Hitch - This is effectively a slipped noose but I use it all the time, it's my personal go to.
3c. Poachers knot - If you have a carabiner or know you're never going to need to untie this knot it's hard to beat
# Adjustable Loop / Friction Hitch
4a. Adjustable Grip Hitch - Easy to learn and holds better than the Midshipman's
4b. Midshipman - it's a little more complicated but this was Ashley's favorite because it can be tied under tension
# Bend
(Bends and fixed loops usually have the same structure so you might not need this one)
5a. Zeppelin Bend - seriously just learn this one, sixty nine method is the easiest for me. Knot is easy to tie, doesn't slip, and is easy to untie.
5b. Sheet Bend - this knot... is fine but you already know it if you learned the bowline above as it's the same structure
Bonus Section
1. Trucker/Truckee - probably one of the most useful knots around, learn the method that uses a slip knot for the mid loop and it'll make even easier
2. Canadian Jam Knot - Useful for bundling things, it's a knot I find myself using a lot
3. Voodoo Hitch - You can use it in place of a ratchet strap if you have a couple of carabiners
4. Icicle Hitch - Ever wanted to tie a rope to a butter metal pole and keep it from slipping? This is the knot, it cinches and grips things with so much friction you can tie a rope to about anything vaguely cylindrical
Do they end up breaking every couple years?
One drawback is that the two ends often end up different lengths, but otherwise it's a great knot!
I've learned it a month ago and couldn't be happier.
So first you wrap one lace around the other and pull it tight, well before you pull it tight wrap it around one more time. This helps hold the laces tight for the next step where you fold the laces and wrap them around each other. Do that a second time as well before you pull it fully tight.
Without video or illustration I suspect this is not easy to follow. Oh well.
The advantage of the continuous loop is that it can’t end up inside the waistband during laundry.
He published an addendum https://www.youtube.com/watch?v=EbTYCHPLWLI
Recently, due to Scouts, learned more and I can't believe how often I use them.
... and... this knot is new to me. I'm stoked to add it to the brainbox. Way to go, OP!The way that loading it crosswise causes it to shift into a double half hitch, turning from a "hold fast" knot to a slipknot... That's funky behavior and should disqualify it from being among the first few knots people learn. If you're using it for its advertised purpose, it's downright dangerous, and the square/granny confusion is just needless pain to discourage a newbie.
If you wanna tie two ropes together and have a less finicky experience, use a fisherman's knot. Which is basically a pair of overhands, each around the other rope.
It's a much more reliable knot for trying two ropes together, lacks the annoying gotchas of the square knot, and for a long list of reasons I won't bore you with here it is a better foundation for learning other knots. (It's no good for drawstrings though, too reliable, no quick release).