An A1 Mini requires a smaller nozzle, a customized profile, specific filament, and quite a bit of work in Blender and the slicer to successfully print 32mm figures (approx. 1/56 scale). Even those larger figures aren't anywhere as good as the quality of injection molding you get from a Games Workshop, Archon Studio, Wargames Atlantic or Bandai kit. You typically need an SLA printer for that - which requires PPE and ventilation due to the hazardous materials.
I don't think my A1 Mini would have success trying to print at 1/72 at the same detail as an injection molding process. I've done 28mm figures on it, but it was a lot of work and had a high failure rate.
Well you can get a roll of PLA for 10€, which is 1kg. I'm not sure how big these sets are but the material cost per unit is basically zero for things this small.
A bit besides the point, but an FDM printer is definitely not good enough to reproduce these somewhat convincingly. That being said, a cheap-ish resin printer will probably do the job, and they are generally in the same price range.
Please don't resin print at home, especially if you have kids, unless you really know what you are doing. And by that I mean professional experience handling hazardous materials and provisioning a work environment for them.
The internet is rife with influencer content that makes these look OK and "not that dangerous", along with people who want to believe that rather than face buyer's remorse.
It's more dangerous than you think. It's messier than you think. The process steps are more ennui than you think. If you don't respect it you will make unsafe mistakes out of lack of knowledge, or impatience, or lazyness.
This shouldn't really be consumer gear. You can also fuck up on health and safety with FDM printers, but the default beginner lane (printing PLA in common colors) is a lot less risky on zero knowledge entry.
I agree. Kids or animals. Specially dogs that are mindless brutes.
I've been 3d printing with resin for a long time before I had my dog. Now I don't do it, unless I can be sure that I can have the dog out my printing room for several days straight, for the water-washable resin to solidify on the sun after usage, and all the different after-print steps that have to be taken care of.
It's also annoying to clean the plate, and deal with the resin bottles when you stop using them. There's no easily accessible infrastructure to dispose of the waste from the printing process so if you become lazy, you end up creating toxic hazards for anyone in the community. Not a good outcome at all.
Still, safe 3d printing brings me a lot of joy, specially to prepare board games sessions with friends and neighbours. Printing, painting, etc. You just have to be responsible and civic and do the right thing.
There's a safe way to handle this stuff, but you have to be very disciplined about it. Animals and kids complicate that big time.
At 22mm scale the cost of filament is basically negligible (literally pennies), but yes, you would have to either buy STL files or make them yourself in Blender.
> At 22mm scale the cost of filament is basically negligible (literally pennies)
Even assuming no losses, just by volume, something like $0.10 per figure, and packs of 1/72 scale figures that retail for $20 are often a 20-50 figures.
I did not know that this was a hobby for adults and I find it interesting that the one kid's toy if the other person's collectible. When I was in primary school in the late 70s we used to buy lots of 1/72 scale soldiers on second hand markets and had buckets full of them. Great battles were fought, and we lost lots of them, because we often played in the garden and we apparently were really good at camouflaging those tiny soldiers. For us they were just consumables, but it seems that we had the same Airfix soldiers that collectors buy today.
Interesting that this charts by _sets_, not total production volume.
I wonder what the market is like. I'm vaguely aware of Warhammer as a hobby, that's adjacent enough to my social media that I can "see" it, but not people buying miniatures. Does it sit adjacent to railway modelling? Are people making dioramas of Waterloo still?
.. a quick check reveals that OO is 1:76, so they wouldn't quite be right.
A plastic soldier set is on the order of $20, and collectors will often purchase dozens.
A Bambu A1 mini (which is sufficient for the level of detail needed for these figurines) is about $200, which breaks even after 10 sets.
I don't think my A1 Mini would have success trying to print at 1/72 at the same detail as an injection molding process. I've done 28mm figures on it, but it was a lot of work and had a high failure rate.
more info: https://www.youtube.com/watch?v=R7pBUk8AvJ8, https://www.youtube.com/watch?v=ldkW5nXRXN4
But either way, margins for some companies like mentioned GW are huge
$200 for a printer does not break even at 10 sets if the sets are $20 unless the cost per unit printed is $0.
The internet is rife with influencer content that makes these look OK and "not that dangerous", along with people who want to believe that rather than face buyer's remorse.
It's more dangerous than you think. It's messier than you think. The process steps are more ennui than you think. If you don't respect it you will make unsafe mistakes out of lack of knowledge, or impatience, or lazyness.
This shouldn't really be consumer gear. You can also fuck up on health and safety with FDM printers, but the default beginner lane (printing PLA in common colors) is a lot less risky on zero knowledge entry.
I've been 3d printing with resin for a long time before I had my dog. Now I don't do it, unless I can be sure that I can have the dog out my printing room for several days straight, for the water-washable resin to solidify on the sun after usage, and all the different after-print steps that have to be taken care of.
It's also annoying to clean the plate, and deal with the resin bottles when you stop using them. There's no easily accessible infrastructure to dispose of the waste from the printing process so if you become lazy, you end up creating toxic hazards for anyone in the community. Not a good outcome at all.
Still, safe 3d printing brings me a lot of joy, specially to prepare board games sessions with friends and neighbours. Printing, painting, etc. You just have to be responsible and civic and do the right thing.
There's a safe way to handle this stuff, but you have to be very disciplined about it. Animals and kids complicate that big time.
Even assuming no losses, just by volume, something like $0.10 per figure, and packs of 1/72 scale figures that retail for $20 are often a 20-50 figures.
I wonder what the market is like. I'm vaguely aware of Warhammer as a hobby, that's adjacent enough to my social media that I can "see" it, but not people buying miniatures. Does it sit adjacent to railway modelling? Are people making dioramas of Waterloo still?
.. a quick check reveals that OO is 1:76, so they wouldn't quite be right.
If you want to this historic wargaming hobby in action: https://www.youtube.com/@LittleWarsTV