Global Village Construction Set

(opensourceecology.org)

102 points | by jacquesm 1 day ago

10 comments

  • caust1c 5 hours ago
    If you find the OP interesting, you might find Project Kamp more interesting:

    https://projectkamp.com/mission.html

    The OP seems like the academic approach to what project kamp is learning by doing: They're attempting to build a community that's eventually completely self sufficient on a fairly limited land space, and documenting the whole process.

    • drooby 3 hours ago
      I like Project Kamp and have been following them for years. However, I feel they’re moving quite slowly and often making mistakes on problems that have already been solved. For example, it took them a while to figure out their composting toilet, and even now it’s not a great solution.

      They tend to have what are essentially interns do a bit of “research” and then piece together a solution. That said, I do applaud their efforts. It’s very entertaining to watch, and they seem to be hiring people lately who are more knowledgeable in their fields.

      So, I very much appreciate this open-source-ecology “academic approach.”

      • cbdevidal 3 hours ago
        I’ve been following Open Source Ecology for years and they too are moving quite slowly. One part of the website points to a 2014 presentation. I’ve seen very little progress in the last ten years. Sad, because it’s a great idea.
  • dylan604 5 hours ago
    Lots of link rot in their list of stuff. Starting at the top of the list for the 3D printer goes to an Amazon 404. The John Deere twine baler redirects to Deere's home page.

    Is this something that has since been abandoned and being shown here for historical purposes? An example of another panacea idea that just lost internet steam?

    • greggsy 1 hour ago
      I noticed too and gave up trying to find a working link to the retail models. From what I can tell the site was last updated in 2014
    • toomuchtodo 4 hours ago
      They're actively pushing it on Instagram interestingly enough.
  • evolve2k 5 hours ago
    I’m conflicted. Firstly really like this project and its open source and community empowerment ideals. My concern is around how these tools essentially accelerate planetary resource extraction, with from what I can see no discussion or attempt to addesss this potential impact/dynamic.

    In addition to bringing about greater freedom and community empowerment the project would benefit from being explicit on how it limits or seeks (even through principals) to limit excessive plantary resource extraction.

    There’s a plastics project that illustrates what I mean, they help people make machines that recover and recycle plastic. Circular resource use, make that part of your front and center.

    • iamnothere 4 hours ago
      The project seems to be about bootstrapping a civilization after collapse, and you’re worried about... accelerating resource extraction?

      None of these machines are cost-effective in the current day world. Actual resource extraction operations are going to use massive machines made by big manufacturers. Small scale hobby miners and such will just order equipment from AliExpress or refurbish old equipment. There is literally zero risk of this project accelerating global resource extraction.

      • dylan604 50 minutes ago
        The project seems to be about bootstrapping a civilization after collapse...

        leads to: Small scale hobby miners and such will just order equipment from AliExpress

        good to know that AliExpress will have the staying power to survive the collapse of civilization. we can all sleep easier knowing that while food/water/fuel will be available to those that can take it, your cheap shit from far away lands will still be a web order away. /s

    • oh_my_goodness 4 hours ago
      It's extremely self-limiting compared to the real industrial processes that we're actually using.
    • vkou 5 hours ago
      > My concern is around how these tools essentially accelerate planetary resource extraction, with from what I can see no discussion or attempt to addesss this potential impact/dynamic.

      You can't meaningfully address that at a grassroots level because of the tragedy of the commons.

      You have to engage with that problem at a higher level of organization. (National/Transnational).

      • robotbikes 4 hours ago
        The commons were actually fairly well regulated by community norms that were well documented and established. The creation of the notion of the tragedy of the commons was quite possibly propaganda so that large land owners could consolidate and enclosed the commons under the guise that they could manage it better especially after traditions were disrupted.
        • vkou 3 hours ago
          > The commons were actually fairly well regulated by community norms that were well documented and established.

          Not really. You are correctly citing the enclosure acts as a historic example, but that was not beginning or the end of history. It was just a recent, location-specific historic moment when big English landlords won in the millenia-old power struggle between peasant and landlord.

          Control of the commons - land and the resources buried in it - has been a point of contention and bloodshed for as long as recorded human history. It's a pendulum that swung back and forth, but has always had bad actors making personally-profitable, socially-impoverishing decisions.

          For an alternative example of how things have gone in other places, look at the blood feuds between ranchers and farmers[1] in the American west, concerns over upstream and rainfall water rights in literally any part of the world that relies on irrigation, or, the varied situations where existing landlords politically won the struggle... Or lost it in the 20th century.

          As for well-established[2]...

          ---

          [1] The enclosure acts echo this farmer/rancher dichotomy, actually. Feudal lord/serf relationships have the lords derive wealth from having ever more serfs doing ever more labour-intensive agriculture on their land. The enclosure acts, however, were intended to drive the peasants from their land, because in the case of England, the lords figured out that they can derive way more wealth from turning over their land to low-labour grazelands for sheep. And the way they could do that was to use the law as a cudgel to drive out their tenants at sword and gunpoint.

          [2] They were only well-established for particular points in history. Prior to William the Conqueror arriving in England, and stealing all the land in it for himself and his mercenaries, there were also 'well-established' land use norms - that greatly limited the power and ownership-of-land granted to lords and petty kings. The Norman conquest turned all that over - into a different 'well-established' equilibrium - that was then, again, turned over into a 'well-established' equilibrium after the passage of the enclosure acts.

          • thewanderer1983 3 hours ago
            Someone only has to take part in a makerspace to see tragedy of the commons in action.
            • mystraline 2 hours ago
              Precisely.

              A few decent folks try to start up a great idea. More join. Some dont share the ideals.

              More join, less ideals shared.

              More join. Cool, free shit! (Not really, but this is when the commons is shit on and good will starts being lost.)

              Group starts cracking at the scenes. Factions form. Badness sets in. Thefts spike. Abuse and vandalization of equipment is the norm.

              I left my local makerspace for these above reasons. And I made my own. Cost more, but my equipment works and is right there.

  • ipnon 3 hours ago
    In Dan Wang’s recent “Breakneck” he makes the case that process knowledge is what really drives technological cultures, not the creation of tools or blueprints. He questions whether blueprints of any specificity, sent back to Roman times, would be enough to build something like an automobile or combine.
    • WillAdams 2 hours ago
      Steam power wasn't feasible until the Bessemer process and rolled sheet steel made the creation of pressure vessels a reliable and repeatable process.

      An internal combustion engine requires that, plus ceramics and an alloy suited to high temperatures (for the spark plugs) as well as copper or aluminum for wiring.

      A good book which covers this is:

      https://goodreads.com/book/show/35068671-the-perfectionists

  • khaki54 4 hours ago
    This is exactly the type of information you want loaded on a HDD tucked away in case of calamity. You won't be able to find all the parts but the ideas would be invaluable.
    • userbinator 4 hours ago
      More like etched on a stone tablet.... or disc.
  • jojobas 1 hour ago
    So that's what G.E.C.K. would look like!
  • eulgro 2 hours ago
    What exactly was the process to choose the 50 machines?

    I wonder how "Hay rake" got on the same list as "CNC precision multimachine" for example? If you asked me the former is probably more useful than the latter.

  • burnt-resistor 2 hours ago
    As seen in a 2011 TED talk: https://www.ted.com/talks/marcin_jakubowski_open_sourced_blu...

    Honestly, I wished this is something like a Colin Furze or Watch Wes Work would take on to bring projects over the finish line.

  • fnord77 3 hours ago
    It says the design of the 3D printer is done. But on the 3D printer page, there's nothing, no design documents, just a picture.
  • jauntywundrkind 3 hours ago
    this gave me a lot of faith in humanity. back in ~2014.

    still cool. still something i want to see in the world. but not super dynamic.